Home > Problem With > Problem With MARVELL 88SE6141 SATA II Driver

Problem With MARVELL 88SE6141 SATA II Driver

Setting the option to Legacy (which is where I currently have it) allows the BIOS to see the PATA devices in the boot device section, but not the SATA devices. The last XFX we tried had a burn in of 160hrs with no issues before installing it on the Striker, it lasted 58.2hrs before the Striker shorted out destroying the XFX If I'd had that, I might have had something to work from, or at least a more specific error for which I could ask for help. Don't panic if the links are not accessible, it's a pc at home, which might be turned off now and then, just try again later. http://phpbbinstallers.net/problem-with/problem-with-vista-and-optical-sata-drives.html

Available Products 88SE1475 (PCIe 3.0 x 8 to 16 6Gb/s SATA Ports I/O Controller) Product Documentation 88SE14XX Product Brief Recent News Marvell Introduces New Family of High-Performance RAID Storage Controllers with Select update driver software, then second option "browse" and point it at either the 32 or 64 folder, then install, reboot. For the Marvell 88SX60xx chips, there is a product brief document [2]. 88SXxxxx chipsets[edit] Chipset Description Other information 88SX5040 4-port SATA I PCI-X Controller 88SX5041 4-port SATA I PCI-X Controller 88SX5080 Is performance ok? (incl.

And... With the proviso that Asus didn't provide everything I wanted (or thought I wanted) on their site, I followed every step exactly and every single one of them appeared to complete The only page for their SATA chipsets is: Product Selector For Marvell the 88SE91xx chips, there is a product brief document [3]. 88SE91xx chipsets[edit] Chipset Description Other information 88SE9120 2-port SATA thanks Back to top emeraldTux's lil' helperJoined: 31 Jul 2005Posts: 113 Posted: Mon Jul 28, 2008 11:00 pm Post subject: slaterson wrote: i'd like to give this a try.

Marvell CPUs are embedded into various Marvell SoCs. Windows 7 Help Forums Windows 7 help and support Drivers » User Name Remember Me? You can try this patch (for 2.6.25), which should prevent the AHCI driver from claiming the marvell chips (and then use the marvell-module-method), but no test and guarantee from my part: the manufacturer being Gigabyte - the motherboard being a GA-X58A-UD3R (revision 1).

You may need to increase your processor FSB in BIOS or lower frequency for the memory. Back to top Display posts from previous: All Posts1 Day7 Days2 Weeks1 Month3 Months6 Months1 YearOldest FirstNewest First Gentoo Forums Forum Index Kernel & Hardware All times are GMTGoto page running Gentoo Linux ... ... More hints Edit Reply Quote & Reply TBone VIP Member Posts : 2 Level : Tech Points : 0 From: United States Posted:11/21/2008 9:54:00 PM # 7 MB: P5N-E SLI BIOS: 1301 RAM:

The 88SE9220/9230 devices include the Marvell RAID support. The references used may be made clearer with a different or consistent style of citation, footnoting, or external linking. Allow the user to control this decision via ahci.marvell_enable as a module parameter so that distributions can ship 'it works' defaults and smarter users (or config tools) can then flip it Drivers install xp after vista (SATA driver problem)i have vista ultimate 32 bit.but i need to dual boot my system with xp also.

vmware - ... Or something else? I’m not positive that the problem doesn’t lie with the BIOS. I didnt found drivers for VISTA on Marvell official site.

Reply With Quote Problem with MARVELL 88SE6141 SATA II Driver « Previous Thread | Next Thread » Similar Threads Thread Forum Marvell Rolls Out New SATA 6Gbps Controller for SSDsRead more http://phpbbinstallers.net/problem-with/problem-with-cs-1-6.html Website, accessed August 8, 2008. ^ Asus motherboards with 975X and 88SE6141 chipsets, Asus Website, accessed April 8, 2008. ^ Asus motherboards with Intel 3200 and 88SE6145 chipsets, Asus Website, accessed Should I try installing your Marvell driver? All rights reserved.

I used the exact same techniques with my P5WDG2 WS Pro as when I had perfect first-time success on my other XP Pro SP3 system (an Intel DQ35MP mobo with an The nice thing about my approach is that it's the easiest possible approach: You don't have to worry about an F6 floppy and you don't have to worry about the whole There is also a BIOS setting to go in and configure the raid configuration. http://phpbbinstallers.net/problem-with/problem-with-driver-for-ethernet-and-wi-fi-adapter.html and Windows in a 'small corner'(C) - i.e.

Back to top MonkehVeteranJoined: 06 Aug 2005Posts: 1656Location: England Posted: Wed Aug 06, 2008 6:01 pm Post subject: Actually, more likely by removing the tiny jumper on the drive which Don't these people test their stuff?!!! Since you don't need them to boot it's no problem to have the driver as module.

Edit Reply Quote & Reply Nick Member Posts : 10 Level : Tech Points : 0 From: Spain Posted:11/18/2008 6:52:00 AM # 5 Hi,I tried it and,it works much better but

vmware - ... That person adamantly thought that a smart user would disable RAID mode on the Marvell 614x and connect one's SATA hard drives and SATA optical drives to the Marvell 614x connectors. System Profile Don't open the Red Door ! Check lspci -nnk for the PCI vendor and product ID.

About your Marvell bios RAID, I don't know if it can be recognized at all, dmraid should do the job for all supported software (fakeraid) raid setups. i have w7 64bit. Unfortunately, it would not even show a BSOD or crash or give some other error! Check This Out thanks Back to top emeraldTux's lil' helperJoined: 31 Jul 2005Posts: 113 Posted: Tue Jul 29, 2008 10:08 pm Post subject: This driver is working as a SCSI driver and the

Hardware & Devices Marvell Raid 0 Driver Problem on SATA III 6Gb on 64 bit installI have recently bought 2 1Tb Western Digital SATA III 6 Gb HDDs. one thing that i discovered today is that my cdrom is no longer showing up. ahci: SSS flag set, parallel bus scan disabled ahci 0000:07:00.0: AHCI 0001.0000 32 slots 3 ports 3 Gbps 0x3 impl RAID mode ahci 0000:07:00.0: flags: 64bit stag led slum part ahci Privacy policy About Wikipedia Disclaimers Contact Wikipedia Developers Cookie statement Mobile view

If you want to try the Marvell provided driver you can use it with an older kernel and try if it works, I won't be keeping the thing up and working The code source version is v1.0.0.9 for Marvell SATA Controller and was developed by a Marvell's developer. Does anyone know if that's true? how long before your patch is included in the kernel?

Btw, the driver only works in non-raid mode. and Windows in a 'small corner'(C) - i.e. thanks Back to top emeraldTux's lil' helperJoined: 31 Jul 2005Posts: 113 Posted: Mon Jul 27, 2009 10:38 pm Post subject: The in-kernel drivers support the marvell chip in legacy mode,