Home > Hp Envy > Re: Envy 6 Hinge Stiff And Causing Problem With Screen.

Re: Envy 6 Hinge Stiff And Causing Problem With Screen.


After HP replaced the screen, The webcam didnt work. I found all LCDs listed in the service manual for HP Pavilion dv9000 and dv9200 on the page 151. I had disassembled entirely and rebed the anchors in epoxy resin. Joe February 27, 2011 | Your web-site has been very helpful. navigate here

Try reconnecting memory modules. You'll have to replace the screen. Remove the left hinge assembly from the laptop. You can see the inverter board when you remove the screen bezel. https://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Re-Envy-6-hinge-stiff-and-causing-problem-with-screen/td-p/5932023

Hp Envy Hinge Fix

I saw more cheap plastic and had a horrendous experience with a big multimedia notebook. This metal block originally attached to the top cover assembly. I am so fricken pissed!!!

STEP 9. When I read your comments again, it sounds like you have either defective backlight cables (attached to the screen) or the screen itself going bad. Ben Smith August 11, 2009 | Hi, Iv got a compaq c300.. Hp Envy Touchsmart 17 Hinge Repair tag on the video cable connector.

Hinge and enclosure too, by the same side, of sure. Hp Laptop Hinge Recall I have a problem where the screen is normally white, but I get an intermittent display depending on how I move the laptop. As the laptop is only 3 months old I would expect to be covered by warranty.I have made a further email to technical support but am not expecting a sensible reply i am pretty satisfied with my fix that i wont bother trying to get the warranty through them.

i connect it to the tv in the den and play star wars battle front 2 etc perfectly!... Hp Envy 17 Hinge Problem The nx models came with 15 or 14 screen and the part numbers are the same, both for nx and nc series screens. my laptop falled down and the screen broke ,its now completely white .do you thing its the inverter ,the screen or both i have to replace ? Please look for a private message from an identified HP contact.

Hp Laptop Hinge Recall

I guess all I need to know is whether or not I have dual or single lamps inside. http://www.insidemylaptop.com/how-to-replace-broken-left-hinge-in-hp-pavilion-dv9000/ the display is fine in the first half the screen and the rest of the screen is just white.. Hp Envy Hinge Fix I guess it's not the video cable failure. Hp Envy 15 Hinge Repair Sign in to make your opinion count.

Thanks, Dan cj2600 December 7, 2008 | Dan Brown, If I tap on the button that puts the computer into standby when you close the lid the LCD screen blinks to http://phpbbinstallers.net/hp-envy/re-hp-envy-m6-k025dx-black-screen.html Any help in where to start! But then my sis gave me a big binder clip and i squeeze that on the top so i dont have to hold it. then one day it just all of a sudden went completeley white. Hp Envy 17 Hinge Repair

IML Tech July 15, 2010 | BigD, I have a problem with my Pavilion Dv9610us laptop. I've seen both failing the same way - white screen. Well, I can't afford to buy a new computer every few years. his comment is here dyde July 18, 2010 | Thanks for your website.

Every thing went as you said. Hp Envy 15 Hinge Replacement js_buyandsell May 10, 2008 | I had the same problem. This is still the case ?

Anyone who watches an amplifier turn on and work after tackling a difficult problem, knows that feeling of elation.

IML Tech October 20, 2009 | Dave D, The only problem is that now my screen is black, totally black, like there is no power going to the screen. If so where do I order it from. I couldn,t find the sticker with the numbers on it but I found that the actual broken hinge has a number on it that I used to make sure I got How Much Does It Cost To Fix A Broken Laptop Hinge For me just to take it to a computer repair store is 100.00.

Gilbert December 28, 2009 | I replaced my hinges - but now my battery does not charge - do you know what cable is the battery cable are do you might Now to get the LCD to function I have to grip the top left corner, squeeze just right, and apply some downward pressure. Isabel March 10, 2010 | Hi I have a Hp laptop dv9000 my monitor keep's going out and the flat pannel where the different lights are have went out but not http://phpbbinstallers.net/hp-envy/re-hp-envy-recline-27-screen.html Loading...

They claim that it will "work with all HP Pavilion DV9000 series laptops", so I ordered it before taking my laptop apart - it was worth the risk! Could be just loose connection. Is this a must or can i skip it? (Actually re-reading everything, it sounds like you only replaced the cover because you needed to in order to replace your hinge, correct?) STEP 3.

the backlight turns on like it is going to work, but that is all it ever does. oh, and i live in the uk cheers IML Tech January 20, 2010 | martin mmachi, my model is the dv9605ea and i seem to have the EXACT same problem yours Then I worked with HP and they repaired it FREE with it out of warranty and after I had had it apart as you have...

Please check out the posts (31, 81, I tried removing the battery and ac power and pressing the power button for a minute.

You cant just replace the video card on this model as i thought when i purchased it (motherboard and videocard are joined). can i get some help to solve this problem.(urgent pls) Marc February 3, 2010 | If the image is displayed correctly via external monitor, but there is still a white screen I repaired it much like you did. but it hopefully will help someone out!

IML Tech December 15, 2010 | Jeremy, the lower third portion of my screen slowly turns black. Options Mark as New Bookmark Subscribe Subscribe to RSS Feed Highlight Print Email to a Friend Report Inappropriate Content ‎02-15-2013 07:25 AM Hello shrimpeh, This thread was forwarded off for You'll have to disconnect the video cable from the LCD screen (connector 2) and the inverter board (connectors 3 and 1). Is the connector on the back of the lcd the same so that you can swap any lcd for testing or do they all have specific connectors on the back as

Push the hinge to the fully open position very carefully ... 15 Step 15: Now depending on how bad your mounting holes were damaged, will effect how you do this step. I love your website and your kindness to share your knowledge. I noticed a fault with small sharp flashing lines so after reading a few surgestions I tested the connection on the back of the screen, took it out and replaced it. I am pretty sure I'll go for a Dell next time, give them a chance to prove themselves :) Thanks for your reply, maybe my laptop knew how angry I was

How can I tell (without taking the thing apart to see the part sticker) if i have the single or duel lamp display?