Or another way to format disk 1? Mark April 26, 2008 10:00 am Reply # Hi I have a new vista machine that windows is corupt. In contrast to your dated IDE statement; Considering the age and interface, IDE users would likely find them selves in more need of a how to article like this than current Explorer has assigned a letter drive to the old Maxtor hard drive, but when I try to access it I get "Insert disk in drive G:" Why would this be? his comment is here
In the case both the HDDs are IDE, you need to specify and let know the BIOS which drive from which to boot – i.e. A clone will make a duplicate copy of the hard drive sector by sector which will allow you to fix the problem and recover data. CRC errors happen when there's a bad spot on the media of your hard disk. I would have not been able to do this if you had not helped me diagnose the problem.
Please help I have a lot of files on my computer I didn't back up and I don't want to loose the information I have on my computer. I went through the procedure you suggested, but still nothing. DTI Data Recovery September 17, 2008 5:25 pm Reply # Jay, there is a little sound bar at the bottom right corner of the video on this page, but on the You might have the SATA ports disabled in the BIOS.
Report kcd- Jan 2, 2010 at 11:25 PM Excellent advice. So we'll give that a try. Does the laptop need to be taken apart or can this be done in a cable connection? Sabrent Usb 3.0 Sata/ide 2.5"/3.5"/5.25" Hard Drive Converter Usb-dsc9 All of the cables are keyed and they will only go in one way.Boot.
Try going into the control panel: Administrative Tools: Computer Management:Storage: Disk Management: From here you can partition and format your new drive any way you want from here. Second Hard Drive Not Showing One hard drive has recently crashed (not booting up anymore) and I'm trying to recover as much data from it as possible. Also, should I install the new drive and the Gateway recovery disk prior to trying to re-install my old hard drive as the slave, just to be safe? http://www.tomshardware.com/forum/267011-32-hooking-computer-internal-hard-drive-computer-slave You will see an option box appear.
If it makes any difference here are the specs of the drive S/N : 5VP0SY## ST31000528AS P/N : 9SL 154 - 300 Frimware : CC34 Date Code : 0984# Site code How To Get Data Off An Old Hard Drive Once you take out you have a short amount of time before it "thaws" so to speak. New question? Drive did not show up in the Vista.
So, when I get the failed drive setup as a slave to my working drive as Master - the system starts to boot (see the Windows XP splash screen and green a fantastic read Right-click on it > new simple volume > next *** don't change "SIMPLE VOLUME SIZE IN MB" if you don't want to create additional partitions *** The same result can be New Hard Drive Not Showing Up Windows 10 Report generic_idea_machine- Jan 18, 2009 at 05:05 PM Thanks xpcman. How To Connect Two Sata Hard Disk In One Pc folders, and sub-folders For Windows 7: 1) Open Computer Management -> Disk Management 2) Note that the disk that won't mount, disk 5 for example, is listed as "Offline" 3) Right
Bootmaster took about 5 minutes to fix the MBR. http://phpbbinstallers.net/hard-drive/replacing-my-hard-drive.html Most do not, but you never know. And the drive is not empty. Today I still do this, but now with a 250GB portable drive (WD Passport), which I slip into my camera case every time I leave home: You never know when something How To Install A Second Hard Drive Windows 10
Report gunfucious- Jul 24, 2010 at 06:15 PM You are the man or woman. Mike C. In fact that is a good idea for people that have an old drive that is working. http://phpbbinstallers.net/hard-drive/replace-with-larger-primary-hard-drive-in-laptop-now-showing-old-drive-size-windows-7-650gb-to-1tb-drive-change.html I have a few bank account passwords on there and also all my sites passwords and stuff.
When transferring NTFS formatted disks from one machine to another, permissions can restrict access. How To Connect Hard Drive To Motherboard However, when I attempted to start up the machine nothing happened. thank you Report Stew- Jun 8, 2010 at 03:09 AM Dankeschön, du bist meinen Lieblings Mann.
Reply James Bruce October 5, 2016 at 5:00 pm Depends on the shop, but anywhere with a "geek helpdesk" style service should be able to do that for you, yes. For Windows XP (all data on the problem disk will be lost!): 1) Open Computer Management -> Disk Management 2) If the offending disk doesn't show up in Disk Management, select It was an oldish HDD, and a tech guy bought a second hand HDD that was the same (on Ebay) and swapped some parts over. Usb Hard-disk Drive Enclosure Chuck,I'm an old school tech and the way I've found that is most succesful would be to wrap the drive in plastic wrap, stick in a ziplock freezer bag and put
You could be transfering a virus.After the data files are transfered, reformat the old drive. How do I retrieve the files from the hard drive in a dead computer? Reply Charlsu August 29, 2016 at 2:39 pm I only have one sata port on my board can i still add one more drive? http://phpbbinstallers.net/hard-drive/repartitioning-hard-drive.html What am I missing ?
any problem with that? i was told that the only way i could solve this problem was to format the hardrive.but, if at all i need to do that, i want to "slave" the hardrive After you have your desktop going on the new hard drive turn off the computer and follow the steps above and slave the old drive. I presume they are no use for recycling?
After that same thing.